Material: zirconia ceramic
Density: above 6.0 g/cm3.
Our normal product diameter from 1mm to 15mm, the max diameter can reached 100mm. the normal length within 100mm. but we also can provide 1000mm length ceramic rods.
high strength pump ceramic rods with high wear resistance, its working life almost 10 times than cemented carbide. so this advanced ceramic material has a lot of advantage.
Zirconia (ZrO2) is an extremely refractory material. Its strong resistance to the high temperature and high pressure, lower ratio of the moisture absorption, stable chemical properties, and its capacity of enduring the corrosion of acid, alkali, and organic solvent make it widely utilized in Petroleum exploration, Mechanical industry, chemical industry, natural gas, Medical equipment and environmental protection fields etc. Compared with alumina, it possesses excellent chemical inertness and corrosion resistance at temperatures well above the melting point of alumina.
More about us:
Seamark can supply many kinds of ceramic parts according to the customer’s different requirements. Our products include ceramic plunger, ceramic rod, ceramic shaft, ceramic piston, ceramic tube, ceramic pipe sleeve, ceramic seal ring, special shape ceramic etc.
If you need any further information, please do not hesitate to contact us.
Suzhou Seamark Fine Ceramics Co., Ltd
Mr Beck Jin
Email:info@smkceramic.com
Tel: +86 512 66255075
Fax: +86 512 66255030
Mob: +86 18550512237
